Carbon Collective Ceramic Shampoo Si02

Ceramic Shampoo (formally Hybrid Shampoo)

Our Ceramic Shampoo is a slick, pH neutral shampoo formulated to leave durable SiO2 protection on protected & unprotected finishes, boosting gloss, beading & hydrophilic behavior.

Formulated to complement our Ceramic Coated finishes, Ceramic Shampoo adds a sacrificial protective layer to the surface, extending the life of your ceramic coating. Meanwhile, its deep cleaning properties safely lift bonded contamination from surfaces, restoring the ceramic coating’s protective properties while boosting gloss and beading.

Although designed to maintain ceramic-coated finishes, Ceramic Shampoo is perfect for unprotected vehicles as a quick, easy one-step product that offers impressive deep cleaning and instant protection.

The low foaming properties ensure easy rinsing, whilst the hydrophilic properties sheet off water, helping to prevent water spotting and reducing water usage.

The high-concentration formula only needs 50ml to 12 liters of water, which equates to 10 washes from a single 500ml bottle.

Formulated specifically to work with our external sealants and coatings for optimum protection, our SiO2 Ceramic Shampoo can be used in harmony with Speciale SiO2 Ceramic Detailer or our Hybrid Coating for increased gloss, durability, and protection.

Features:

• Slick pH neutral formula
• Leaves SiO2 protection on unprotected vehicles
• Restores and boosts ceramic coated finishes
• Cleaning and protecting in one easy step
• Deep cleaning – removes bonded dirt from protected finishes
• High concentration – only 50ml needed per 12L of water
• Leaves behind a high gloss streak-free finish

Application Methods: 

Bucket Application:

1. Pour 50ml of product into the wash bucket and fill with 12 liters of warm water. (Optionally, add 10-20ml of Lusso Shampoo to increase foaming).
2. Using one of our Wash Mitts, begin washing the vehicle from top to bottom in straight lines.
3. Once the vehicle is clean, rinse vigorously until the water turns clear.
4. Repeat the process for maximum durability, adding an extra layer of protection, increasing gloss and durability.

Wash Mitt Application:

Pre-wash before application.

1. Using the two-bucket method, add 50ml of your chosen shampoo to one bucket and fill the other with clean water.
2. Wash the car from top to bottom, front to back, as you usually do (using the two-bucket method).
3. After the car is clean, apply a few drops of Hybrid Shampoo directly to the wet wash mitt or pad.
4. Apply panel by panel; a reaction will begin. Top up the mitt with shampoo where required, repeat this process on the entire car.
5. Once applied to the entire vehicle, rinse vigorously until the water turns clear.

In warm conditions, in direct sunlight, panel temperatures can be high. We suggest rinsing each panel straight after application.

Snow Foam Gun Application:

Pre-wash before application, using Ultimus 

1. Using the two-bucket method, add 50ml of your chosen shampoo to one bucket and fill the other with clean water.
2. Wash the car from top to bottom, front to back, as you usually do (using the two-bucket method).
3. After the car is clean, add 50ml of Hybrid Shampoo to the lance bottle and fill with 500ml of water.
4. Apply to the entire vehicle using the Foam Cannon.
5. Using the wash mitt from the wash bucket, wipe the car down panel by panel, rinsing the mitt in the rinse bucket.
6. Once applied to the entire vehicle, rinse vigorously until the water turns clear.