BRANDS
Oberk Supreme Cut
$22.99 - $219.99
STEP 1 DUO Correction System · Stage One
Oberk · Supreme Cut · Cutting Compound
Bring the Paint
Back to Life.
P1500 capable. Zero fillers. Silicone free. The compound that cuts hard and finishes surprisingly well.
Supreme Cut is your Step 1 in the Oberk DUO system — a serious cutting compound built to knock back P1500 sanding marks and remove heavy defects before you reach for the polish.
Best run on a rotary with a cutting pad. DA works too if that's your preferred process — both get results. What sets Supreme Cut apart from the typical heavy cut is the finish it leaves: cleaner than you'd expect from a compound at this cut level, which means less work ahead in Step 2.
Colored a distinct peachy orange — intentionally, so you always know which step you're on. Matches the orange cutting pad. No scent, no silicone, no fillers. Just cut.
Cut Level
P1500
Sanding mark removal
Fillers
Zero
True correction only
Silicone
Free
Body shop safe
Origin
Germany
Engineered & made
At a Glance
Removes P1500 Sanding Marks Heavy cut capable — built for real defect removal, not surface-level correction.
Silicone Free & Body Shop Safe No silicone contamination risk. Safe to use in a body shop environment.
Zero Fillers What you see in the finish is what's actually there — no temporary masking, no fill.
Surprisingly Clean Finish for a Cut Leaves less secondary work than most compounds at this cut level.
Primary
Rotary
Pair with Orange-backed Microfiber Cutting Pad for maximum cut and heat generation.
Also Suitable
DA Polisher
Works with a DA and orange cutting pad — effective if that's your preferred process.
Pad Color
Orange interface Microfiber
Compound color matches the pad — so your step is always visually confirmed.
Directions — DUO Step 1: Correction Stage
1
Prime the pad. Apply 4–6 pea-sized drops of Supreme Cut to the Oberk microfiber cutting pad before your first section.
2
Work in 16 × 16" sections. Apply 2 pea-sized dots of product to each new section. Work the compound until a fine film develops — this indicates the abrasives are breaking down correctly.
3
Remove residue with a quality microfiber towel. Inspect the panel — heavy scratches and swirl marks should be gone.
Once heavy scratches and swirl marks are removed, move on to Oberk SOLE Step 2 to eliminate finer scratches and refine the finish.
worth a look
