BRANDS
Carbon Collective Repel Fabric Protectant 2.0 – 500ml
$57.00
Carbon Collective · REPEL · Fabric Protectant
Fabric Protection That
Bonds to Every Fiber.
Solvent-Based. Hydrophobic. 1 Year Minimum Durability. Flexible, breathable protection — without altering color or finish.
REPEL Fabric Protectant is a hydrophobic textile coating that creates a protective barrier on almost every fabric — offering unrivaled water-repellency against stains, chemicals, and liquid damage.
Unlike many fabric protectants that coat the surface of the material, REPEL bonds to individual fibers. The result is protection that doesn't compromise the fabric — it stays flexible, breathable, and unchanged in color and finish. The only thing that changes is what the fabric will and won't absorb.
Being solvent-based, the coating dries faster, penetrates deeper, and delivers a more durable bond than water-based alternatives. One thorough application lasts a minimum of one year. Two coats deliver maximum protection and longevity.
Durability
1 Year+
Minimum · 2 coats recommended
Formula
Solvent
Deeper penetration · faster dry
Cure
24 hrs
Touch dry 1–2 hrs · full 24 hrs
"Bonds to individual fibers — the fabric stays flexible and breathable whilst protected from stains, chemicals and water damage."
— Carbon Collective · REPEL Fabric ProtectantWhat REPEL does differently
Fiber-Level Bonding Most fabric protectants sit on the surface of the material. REPEL bonds at the fiber level — creating protection that moves with the fabric rather than cracking or peeling off over time.
Breathable & Flexible The coating doesn't stiffen or seal the material. Fabric protected with REPEL remains as soft, flexible, and breathable as it was before — the protection is invisible in every sense.
Solvent-Based — Deeper and Faster Solvent-based chemistry penetrates deeper into fibers and dries faster than water-based alternatives — delivering a more durable bond and longer-lasting hydrophobic performance.
No Color or Finish Change REPEL is formulated to leave the fabric exactly as it was — no darkening, no sheen, no altered texture. It protects without announcing itself.
Pairs with RESET for Maximum Bond Using RESET Antibacterial Cleaner before application removes organic contamination at the fiber level — giving REPEL a clean substrate to bond to and significantly improving durability and coverage.
Directions
Clean with RESET Antibacterial Cleaner first — this removes contamination at the fiber level and creates a stronger bond for REPEL. Allow the surface to dry fully before application.
Spray evenly onto the surface from 20–30cm. Wipe off excess from any plastics, trim, or leather. Touch dry in 1–2 hours, fully cured in 24 hours. Two coats are recommended for maximum durability. Apply the second coat after the first has fully dried.
Formulated For
Convertible Roofs
Carpets & Floor Mats
Fabric Seats
Alcantara
Race-Tex
Shoes
Coats & Jackets
Marquees & Awnings
Key Notes
Clean with RESET before application
Spray 20–30cm · even coverage
Two coats for maximum durability
Allow 24 hrs full cure before use
Do not apply to damp fabric
Do not leave excess on leather or trim
Always test on an inconspicuous area before full application. REPEL is formulated to leave no color or finish change, but fabric types vary — a test patch confirms compatibility before committing to the full surface.
worth a look
