The Mitt Slide™ Bucket Insert. Over the last decade, there have been advancements in design and function pertaining to wash buckets, how add-ons suit your work, how a few parts can better your results.
With advancements come complications, a number of parts joined together to accomplish a goal, and it all gets to be a bit much. Cost, clutter, it all adds up. The more 'things' you have, the more you find yourself chasing simplicity.
This design cuts through all of that, making you re-think what you actually need, and delivers form and function in a single unit. Heavyweight plastic keeps the Mitt Slide from floating, dirt remains 'captured' at the base of the bucket once it sinks thanks to the fin design on the lower portion of the insert while the upper section fits the top curvature of a bucket perfectly.
Center-molded finger slots make the insert easy to install and remove, and I've not once felt like it's stuck in the bucket. A curved foot at the base bottoms out the insert right where you need it, and even if your bucket is not a perfect match for the sizing, it'll ride about an inch above the base and still deliver the function you're wanting.
Formed to fit most 5 gallon / 20L buckets, please check the measurements provided before ordering. Mitt Slide is tested to fit the Ghõst 20L Clear Bucket and Carbon Collective Bucket options available on site.
The Mitt Slide is designed, patented, registered and manufactured in South Korea
Ghõst XL bucket fitment- will push down to the base of the bucket with a little effort
Carbon Collective Bucket- fits just fine BUT does not push all the way to the bottom, rides maybe an inch above the base. ABSOLUTELY works, fits better without the use of a gamma seal
Fits perfectly on 3 gallon buckets. Very convenient to have a washboard like surface to scrub your wash mitt or pads to make sure its clean. As you scrub down all the dirt comes off the mitt pushing it to the bottom of the bucket.
This grit guard works so well.i will be purchasing more. This is a must have in your bucket.
I’ve been rocking the grit guards from chemical kids for a while now and it was time for a change. The old ones kept getting stuck in the bottom of the buckets and were beginning to break. We bought two mitt scrubs from Scott not knowing if they would work with our yeti buckets and we were stoked to find out they fit perfectly! Super easy to remove as well. So far they have been the perfect solution.
Really like the bucket insert work really well