BRANDS
Carbon Collective SHIFT Intensive Cleaner, Glue & Tar Remover
$34.00
Carbon Collective · SHIFT · Intensive Cleaner
Tar. Rubber. Grease.
Underseal. Gone.
Glue & Tar Remover. Track Prep. Restoration Tool. Formulated since 2019 — continuously refined until it was right.
SHIFT Intensive Cleaner was primarily formulated as a glue and tar remover. Throughout development it proved capable of far more — underseal, waxoyl, tyre rubber, track rubber, wheel weight glue, engine grease, oil build-up, and years of accumulated grime. One formula for the jobs that nothing else wants to touch.
In development since early 2019 and through multiple revisions, SHIFT is now in its final, perfected form. The kind of product you reach for when the surface needs real work done — not just cleaned, but stripped back to what's underneath.
Use a dedicated towel for this — something you're happy to toss afterward or repurpose as a shop rag. SHIFT does its job, and the towel absorbs the evidence.
Primary Use
Tar & Glue
Also: rubber · grease · underseal
Application
RTU
Spray direct · dwell · wipe
Development
Since '19
Final perfected formula
"Throughout development we found it could remove more than we ever expected."
— Carbon Collective · SHIFT Intensive CleanerWhat SHIFT removes
Tar & Road Film
Spray directly onto the deposit and leave to dwell for a few seconds until a brown liquid can be seen running from the tar. Wipe with a clean microfibre. Repeat if needed.
Tyre Dressings & Rubber Build-Up
Outstanding for removing old dressings, tyre soap, and stubborn sidewall grime. Saturate a microfibre cloth, rub across the sidewall, re-apply until clean, and rinse to finish.
Wheel Weight Glue
Spray directly onto the surface and use a squeegee or plastic blade to remove foam backing material first. Once the glue is exposed, re-apply and wipe with a microfibre cloth.
Engine Bay & Mechanical Grease
Spray directly onto the area and allow to dwell for 1–2 minutes. Agitate with a stiff bristle brush if needed, then rinse to remove years of oil, grease, and grime build-up.
Waxoyl & Underseal
Classic cars frequently have over-applied waxoyl and underseal. Spray directly onto the affected area and wipe with a microfibre, repeating until the desired result is achieved.
Track & Tyre Rubber Deposits
Spray directly onto the affected area. Using a cloth, lightly wipe in a lifting motion until the rubber deposit has been fully removed.
Application Notes
SHIFT works differently across surfaces — dwell time and method vary by what you're removing. Test a small area before direct application on unfamiliar surfaces. Always wear gloves during use.
Tar
Spray direct · dwell until brown liquid appears · wipe with microfibre · repeat if needed
Tyres
Saturate cloth · rub sidewall · re-apply as needed · rinse to finish
Wheel Weight Glue
Spray · remove foam backing with blade · re-apply · wipe glue residue
Engine Bay
Spray · dwell 1–2 min · agitate with stiff brush · rinse clear
Waxoyl / Underseal
Spray direct · wipe with microfibre · repeat until desired result
Track Rubber
Spray · lift with cloth using upward wiping motion · repeat as needed
Reach for SHIFT when the job involves something bonded, baked on, or built up over years. Use a towel you're happy to retire afterward — it'll earn it.
Safety & Use
Wear gloves during application
Test small area before full application
Use a dedicated wipe-down towel
Store out of direct sunlight
Do not use on headlights or plastics
Keep out of reach of children
Do not use on vehicle headlights or plastics. Wear gloves during application. Test a small area before direct use on unfamiliar surfaces. Do not ingest. Keep out of reach of children.
California residents: Due to CARB regulations, this product is not shipped to or sold in the State of California. Any customer who brings this product into California from outside the state does so under California Law and accepts full personal responsibility. Detail Division LLC and Carbon Collective LTD (UK) are not party to such actions.
worth a look
